4.5.2Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an item then press <Enter> to display the
BIOS SETUP UTILITY
Advanced
Advanced Chipset Settings
WARMING: Setting wrong values in below sections may cause system to malfunction.
North Bridge Configuration
North Bridge Chipset Configuration
|
|
|
| BIOS SETUP UTILITY |
| Advanced |
|
| |
North Bridge Chipset Configuration |
| |||
Memory Remap Feature | [Enabled] | |||
Initiate Graphic | Adapter | [PEG/PCI] | ||
PEG Port Control |
|
| [Auto] | |
PEG Port Force | x1 | [Disabled] | ||
Configure North Bridge features.
Options
Disabled
Enabled
Memory Remap Feature [Disabled]
Allows you to enable or disable the remapping of the overlapped PCI memory above the total physical memory. Enable this option only when you install 64- bit operating system. Configuration options: [Disabled] [Enabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to decide which graphics controller to use as the primary boot device. Configuration options: [PCI/PEG] [PEG/PCI]
PEG Port Control [Auto]
Configuration options: [Auto] [Disabled]
The following item appears only when you set PEG Port Control to [Auto]
PEG Port Force x1 [Disabled]
Configuration options: [Enabled] [Disabled]
ASUS P5E |