Enhanced C1 Control [Auto]
When set to [Auto], the BIOS will automatically check the CPU’s capability to enable the C1E support. In C1E mode, the CPU power consumption is lower when idle. Configuration options: [Auto] [Disabled]
CPU Internal Thermal Control [Auto]
Disables or sets the CPU internal thermal control.
Configuration options: [Auto] [Disabled]
Virtualization Technology [Enabled]
Allows you to enable or disable the processor Virtualization Technology. Configuration options: [Disabled] [Enabled]
The following item appears only when you installed an Intel® Pentium® 4 and later processors that supports the Enhanced Intel SpeedStep® Technology (EIST).
Intel(R) SpeedStep(TM) tech [Enabled]
Allows you to use the Enhanced Intel SpeedStep® Technology. When set to [Enabled], you can adjust the system power settings in the operating system to use the EIST feature.
Set this item to [Disabled] if you do not want to use the EIST. Configuration options: [Enabled] [Disabled]
2.4.4Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an item then press <Enter> to display the
| Advanced Chipset Settings |
|
|
|
|
| Configure DRAM Timing by SPD | [Enabled] |
|
| |
| Hyper Path 3 | [Auto] |
|
| |
| DRAM Throttling Threshold | [Auto] |
|
| |
| Boot Graphic Adapter Priority | [PCI |
|
| |
| Internal Graphics Mode Select | [Enabled, 8MB] |
|
| |
| DVMT Mode Select | [DVMT Model] |
|
| |
| DVMT/FIXED Memory | [128MB] |
| Select Screen | |
| Boot Display Device | [Auto] |
| ||
| TV Connector | [Auto] |
| Select Item | |
| HDTV Output | [Auto] | +- | Change Option | |
| TV Standard | F1 | General Help | ||
|
|
|
| F10 | Save and Exit |
| PEG Buffer Length | [Auto] |
| ESC | Exit |
|
|
|
|
|
|
|
|
|
|
|
|
| Link Latency | [Auto] | +- | Change Option | |
|
|
|
| F1 | General Help |
| PEG Root Control | [Auto] | F10 | Save and Exit | |
| Slot Power | [Auto] | |||
| ESC | Exit | |||
| High Priority Port Select | [Disabled] | |||
|
|
| |||
|
|
|
|
|
|
ASUS |