2.4.5Onboard Devices Configuration

Configure Win627DHG Super IO Chipset

Enable or Disable

HD Audio Controller

[Enabled]

High Definition Audio

Front Panel Support Type

[HD Audio]

Controller

Onboard PCIEX 10/100Mb LAN

[Enabled]

 

LAN Option ROM

[Disabled]

 

Serial Port1 Address

[3F8/IRQ4]

 

Parallel Port Address

[378]

 

Parallel Port Mode

[ECP]

 

ECP Mode DMA Channel

[DMA3]

 

Parallel Port IRQ

[IRQ7]

 

HD Audio Controller [Enabled]

Enables or disables the Azalia/AC’97 CODEC.

Configuration options: [Enabled] [Disabled]

Front Panel Support Type [AC97]

Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or high-definition audio depending on the audio standard that the front panel audio module supports. Configuration options: [AC97][HD Audio]

Onboard PCIEX 10/100Mb LAN [Enabled]

Allows you to enable or disable the onboard PCIEX 10/100Mb LAN controller. Configuration options: [Enabled] [Disabled]

LAN Option ROM [Disabled]

Allows you to enable or disable the option ROM in the onboard LAN controller. This item appears only when the Onboard LAN item is set to Enabled. Configuration options: [Disabled] [Enabled]

Serial Port1 Address [3F8/IRQ4]

Allows you to select the Serial Port1 base address.

Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]

Parallel Port Address [378]

Allows you to select the Parallel Port base addresses.

Configuration options: [Disabled] [378] [278] [3BC]

2-24

Chapter 2: BIOS setup