2 . USB device wake-up (3-pin USBPW12, USBPW34, USBPW56, USBPW78)

Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices. Set to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU, DRAM in slow refresh, power supply in reduced power mode).

P5GD1-VM

P5GD1-VM USB device wake-up

USBPW12

USBPW34

 

3

2

2

1

 

+5V

+5VSB

(Default)

 

USBPW56

USBPW78

1

2

2

3

+5V

+5VSB

(Default)

¥ The USB device wake-up feature requires a power supply that can provide 500mA on the +5VSB lead for each USB port; otherwise, the system will not power up.

¥The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal condition or in sleep mode.

3 . Keyboard power (3-pin KBPWR1)

This jumper allows you to enable or disable the keyboard wake-up feature. Default setting is 2-3. Set this jumper to pins 1-2 (+5V) if you do not want to wake up the computer when you press a key on the keyboard. This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS.

P5GD1-VM

KBPWR1

1

2

 

2

3

 

 

 

 

 

+5V +5VSB (Default)

P5GD1-VM Keyboard power setting

1 - 22

Chapter 1: Product introduction