The following items appear only when you set the AI Overclocking item to [Manual].

CPU Frequency [XXX]

Displays the frequency sent by the clock generator to the system bus and PCI bus. The value of this item is auto-detected by the BIOS. Use the <+> and < - > keys to adjust the CPU frequency. You can also type the desired CPU frequency using the numberic keypad. The values range from 100 to

400.Refer to the table below for the correct Front Side Bus and CPU External Frequency settings.

FSB/CPU External Frequency Synchronization

Front Side Bus

CPU External Frequency

FSB 800

200 MHz

FSB 533

133 MHz

 

 

DRAM Frequency [Auto]

Allows you to set the DDR operating frequency. Configuration options: [Auto] [400MHz] [533MHz] [600MHz]

Selecting a very high DRAM frequency may cause the system to become unstable! If this happens, revert to the default setting.

PCI Express Frequency [Auto]

Allows you to set the PCI Express frequency. This item is set to [Auto] by default. Configuration options: [Auto] [90]...[133]

PCI Clock Synchronization Mode [Auto]

Allows you to synchronize the PCI frequency with the PCI Express or CPU frequency. Configuration options: [To CPU] [33.33MHz] [Auto]

Spread Spectrum [Auto]

Allows you to enable or disable the clock generator spread spectrum. Configuration options: [Disabled] [Enabled] [Auto]

ASUS P5GDC-V Deluxe

4 - 19