PI O Mode [ Auto]

Selects the PIO mode.

Configuration options: [Auto] [0] [1] [2] [3] [4]

DMA Mode [ Auto]

Selects the DMA mode. Configuration options: [Auto] [SWDMA0] [SWDMA1] [SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5]

SMART Moni tori ng [ Auto]

Sets the Smart Monitoring, Analysis, and Reporting Technology. Configuration options: [Auto] [Disabled] [Enabled]

32Bi t Data Transfer [ Di sabl ed]

Enables or disables 32-bit data transfer.

Configuration options: [Disabled] [Enabled]

2.3.5 I DE Confi gurati on

The items in this menu allow you to set or change the configurations for the IDE devices installed in the system. Select an item then press <Enter> if you wish to configure the item.

IDE Configuration

 

Onboard IDE Operate Mode

[Enhanced Mode]

Enhanced Mode Support On

[S-ATA]

IDE Detect Time Out (Sec)

[35]

Onboard I DE Operate Mode [Enhanced Mode]

Disables or allows selection of the IDE operation mode depending on the operating system (OS) that you installed. Set to Enhanced Mode if you are using native OS, such as Windows® 2000/XP.

Configuration options: [Disabled] [Compatible Mode] [Enhanced Mode]

2-16

Chapter 2: BIOS setup