3.Keyboard/mouse power (3-pin PS2_USBPW1-4)

This jumper allows you to enable or disable the keyboard/mouse and USB port 5-6 wake-up feature. When you set this jumper to pins 2-3 (+5VSB), you can wake up the computer by pressing a key on the keyboard (the default is the Space Bar), clicking the mouse, or using a USB device. This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS. The USBPW56 jumper is for the rear USB ports.

P5KPL-AM SE

PS2_USBPW1-4

 

3

2

2

1

 

+5V +5VSB (Default)

P5KPL-AM SE Keyboard Power Setting

1.7Connectors

1.7.1Rear panel ports

1

 

 

 

 

 

 

 

 

 

 

 

 

2

 

3

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10

9

8

7

6

5

1.PS/2 mouse port (green). This port is for a PS/2 mouse.

2.LAN (RJ-45) port. Supported by Realtek 10/100 LAN controller, this port allows 10/100 connection to a Local Area Network (LAN) through a network hub. Refer to the table below for the LAN port LED indications.

LAN port LED indications

 

 

 

 

 

 

 

 

ACT/LINK

SPEED

 

 

ACT LED

 

Speed LED

 

 

 

 

 

LED

 

LED

 

Status

 

Description

Status

Description

 

 

 

 

 

 

 

 

 

 

 

 

OFF

 

No link

OFF

No link

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Blink

 

Data activity

OFF

10M

 

 

 

 

 

 

 

 

 

Blink

 

Data activity

Orange

100M

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LAN port

1-9

ASUS P5KPL-AM SE