Asus P5L-MX 6.ATX power connectors (24-pin EATXPWRand 4-pinATX12V)

6.ATX power connectors (24-pin EATXPWR and 4-pin ATX12V)

These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.

•Do not forget to connect the 4-pin ATX +12 V power plug;

otherwise, the system will not boot.

•Use of a PSU with a higher power output is recommended when configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate.

•Make sure that your power supply unit (PSU) can provide at least the minimum power required by your system. See the table below for details.

EATX12VEATXPWR

+12V DC GND

P5L-MX

P5L-MX ATX Power Connector

+12V DC	+3 Volts	Ground
GND	+12 Volts	+5 Volts
	+12 Volts	+5 Volts
+5V Standby		+5 Volts
	Power OK	-5 Volts
	Ground	Ground
	+5 Volts	Ground
	Ground	Ground
	+5 Volts	PSON#
	Ground	Ground
	+3 Volts	-12 Volts
	+3 Volts	+3 Volts

1-30 Chapter 1: Product introduction