Asus P5LD2 SE P5LD2 SE ATX Power Connectors, 10. ATX power connectors (24-pin EATXPW, 4-pinATX12V)

10. ATX power connectors (24-pin EATXPW, 4-pin ATX12V)

These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.

•Use of an ATX 12 V Specification 2.0-compliant power supply unit

(PSU) that provides a minimum power of 350 W is recommended for a fully-configured system.

•DO NOT forget to connect the 4-pin ATX +12 V power plug; otherwise, the system will not boot up.

•Use of a PSU with a higher power output is recommended when configuring a system with more power consuming devices. The system may become unstable or may not boot up if the power is inadequate.

				EATXPWR
			+3 Volts	Ground
	ATX12V		+12 Volts	+5 Volts
SE			+12 Volts	+5 Volts
P5LD2	+12V DC	+12V DC	+5V Standby	+5 Volts
			Power OK	-5 Volts
	GND	GND	Ground	Ground
			+5 Volts	Ground
			Ground	Ground
			+5 Volts	PSON#
			Ground	Ground
P5LD2 SE ATX Power Connectors			+3 Volts	-12 Volts
			+3 Volts	+3 Volts

2-30 Chapter 2: Hardware information