9.Microphone port (pink). This port connects a microphone.

10.Side Speaker Out port (gray). This port connects the side speakers in an

8-channel audio configuration.

Refer to the audio configuration table below for the function of the audio ports in 2, 4, 6, or 8-channel configuration.

Audio 2, 4, 6, or 8-channel configuration

Port

Headset

4-channel

6-channel

8-channel

 

2-channel

 

 

 

Light Blue

Line In

Line In

Line In

Line In

Lime

Line Out

Front Speaker Out

Front Speaker Out

Front Speaker Out

Pink

Mic In

Mic In

Mic In

Mic In

Orange

Center/Subwoofer

Center/Subwoofer

Black

Rear Speaker Out

Rear Speaker Out

Rear Speaker Out

Gray

Side Speaker Out

11.USB 2.0 ports 1 and 2. These 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices.

12.External SATA port. This port connects to an external a Serial ATA hard disk drive.

The external SATA port supports external Serial ATA 3 Gb/s devices. Longer cables support higher power requirements to deliver signal up to two meters away, and enables improved hot- swap function.

When using hot-plug and NCQ, set the J-Micron eSATA/PATA Controller Mode in the BIOS to [AHCI].

DO NOT insert a different connector to the external SATA port.

13.USB 2.0 ports 3 and 4. These 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices.

14.Optical S/PDIF Out port. This port connects an external audio output device via an optical S/PDIF cable.

15.PS/2 keyboard port (purple). This port is for a PS/2 keyboard.

2-24

Chapter 2: Hardware information