The bundled eSATA module allows you to add an eSATA port on the back of your chassis. To install the eSATA module, connect the SATA cable connector to any of the onboard SATA 1–6 connectors and then screw the bracket to the chassis.

SATA cable connector

eSATA

 

 

 

port

Bracket

We highly recommend that you connect this eSATA port to an eSATA external hard disk drive using an eSATA to eSATA cable. DO NOT connect the eSATA port to a SATA hard disk drive using a eSATA to SATA cable.

eSATA cable connector

4.USB connectors (10-1 pin USB 78; USB 910)

These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed.

Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!

You can connect the USB cable to ASUS Q-Connector (USB, blue) first, and then install the Q-Connector (USB) to the USB connector onboard.

ASUS P5N72-T Premium

2-31