Precomp

Shows the number of precomp per track. This item is not configurable.

Landi ng Zone

Shows the number of landing zone per track. This item is not configurable.

Sector

Shows the number of sectors per track. This item is not configurable.

After entering the IDE hard disk drive information into BIOS, use a disk utility, such as FDISK, to partition and format new IDE hard disk drives. This is necessary so that you can write or read data from the hard disk. Make sure to set the partition of the Primary IDE hard disk drives to active.

2.3.6 H DD SMART Moni tori ng [ Di sabl ed]

Allows you to enable or disable the HDD Self-Monitoring Analysis and Reporting Technology (SMART) feature.

Configuration options: [Disabled] [Enabled]

2.3.7 I nstall ed Memory

Shows the size of installed memory.

2.3.8 Usabl e Memory

Shows the size of usable memory.

2-20

Chapter 2: BIOS setup