9 . Internal audio connectors (4-pin CD1, AUX1)These connectors allow you to receive stereo audio input from sound sources such as a CD-ROM, TV tuner, MPEG card or modem.
P5P800-MX
P5P800-MX Internal audio connectors
Left Audio Channel
Ground
Ground
Right Audio Channel
| | | | | | | | | | CD1(Black) |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | AUX1(White) |
| | | | | | | | | |
| | | | | | | | | |
| | | | | |
Channel | Ground Ground Channel |
Right Audio | | | | | | | Left Audio |
10 . System Front panel connectors (10-pin F_PANEL1)This connector supports several chassis-mounted functions.
P5P800-MX System panel connector IDELED 
RESET
•Power/Soft-off button (2-pin PWRSW)This connector is for the system power button. Pressing the power button turns the system ON or puts the system in SLEEP or SOFT-OFF mode depending on the BIOS settings. Pressing the power switch for more than four seconds while the system is ON turns the system OFF.
•Hard disk drive activity (2-pin IDE_LED)This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable to this connector. The IDE LED lights up or flashes when data is read from or written to the HDD.
•Reset button (2-pin RESET)This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power.
