4 . CPU and Chassis fan connectors (4-pin CPU_FAN, 3-pin CHA_FAN)

The fan connectors support cooling fans of 350mA~2000mA (24W max.) or a total of 1A~3.48A (41.76W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector.

Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors.

P5P800S

P5P800S Fan connectors

CPU_FAN

GND

CPU FAN PWR

CPU FAN IN CPU FAN PWM

CHA_FAN

Rotation +12V GND

5 . Digital Audio connector (4-1 pin SPDIF_OUT)

This connector is for the S/PDIF audio module to allow digital sound output. Connect one end of the S/PDIF audio cable to this connector and the other end to the S/PDIF module.

+5V

SPDIFOUT GND

P5P800S

SPDIF_OUT

P5P800S Digital audio connector

The S/PDIF out module is purchased separately.

1 - 28

Chapter 1: Product introduction