Asus P5QLD User Access Level [Full Access], Change User Password, <Enter, <Enter, Installed, 2.6 Jumpers, [No Access], User Password, Not Installed, Password uninstalled

To clear the supervisor password, select the Change Supervisor Password then press <Enter> twice. The message Password uninstalled appears.

If you forget your BIOS password, you can clear it by erasing the CMOS Real Time Clock (RTC) RAM. See section 2.6 Jumpers for information on how to erase the RTC RAM.

After you have set a supervisor password, the other items appear to allow you to change other security settings.

	BIOS SETUP UTILITY
		Boot
Security Settings			<Enter> to change
			password.
Supervisor Password	:Installed		<Enter> again to
			disabled password.
User Password	:Not Installed
Change Supervisor Password
User Access Level	[Full Access]
Change User Password
Clear User Password
Password Check	[Setup]
				Select Screen
				Select Item
			Enter Change
			F1	General Help
			F10	Save and Exit
			ESC	Exit

v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.

User Access Level [Full Access]

This item allows you to select the access restriction to the Setup items. Configuration options: [No Access] [View Only] [Limited] [Full Access]

[No Access] - prevents user access to the Setup utility.

[View Only] - allows access but does not allow change to any field. [Limited] - allows changes only to selected fields, such as Date and Time. [Full Access] - allows viewing and changing all the fields in the Setup utility.

Change User Password

Select this item to set or change the user password. The User Password item on top of the screen shows the default Not Installed. After you set a password, this item shows Installed.

To set a User Password:

1.Select the Change User Password item and press <Enter>.

2.On the password box, key in a password containing up to six letter or numbers, or both, then click <Enter>.

3.Confirm the password when prompted.

ASUS P5QLD PRO 4-35