7 . USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices.

8 . USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices.

9 . Serial connector. This 9-pin COM1 port is for serial devices.

10 . Coaxial S/PDIF Out port. This port connects an external audio output device via a coaxial S/PDIF cable.

11 . PS/2 keyboard port (purple). This port is for a PS/2 keyboard.

1.10.2 Internal connectors

1 . Floppy disk drive connector (34-1 pin FLOPPY)

This connector is for the provided floppy disk drive (FDD) signal cable. Insert one end of the cable to this connector, then connect the other end to the signal connector at the back of the floppy disk drive.

Pin 5 on the connector is removed to prevent incorrect cable connection when using an FDD cable with a covered Pin 5.

P5SD2-X

FLOPPY

PIN 1

NOTE: Orient the red markings on the floppy ribbon cable to PIN 1.

P5SD2-X Floppy disk drive connector

1 - 24

Chapter 1: Product introduction