2.3.4Primary and Secondary IDE Master/Slave

While entering Setup, the BIOS automatically detects the presence of IDE devices. There is a separate sub-menu for each IDE device. Select a device item then press <Enter> to display the IDE device information.

Phoenix-Award BIOS CMOS Setup Utility

Main

 

Primary IDE Master

Select Menu

 

 

 

 

Primary IDE Master

[

Auto]

Item Specific Help

Access Mode

 

[Auto]

Press [Enter] to

 

 

 

Capacity

 

82 GB

select

Cylinder

39420

 

Head

16

 

Sector

255

 

PIO Mode

[Auto]

 

UDMA Mode

[Auto]

 

Transfer Mode

 

UDMA 6

 

 

 

 

 

F1:Help

↑↓ : Select Item

-/+: Change Value

F5: Setup

Defaults

ESC: Exit

→←: Select Menu

Enter: Select SubMenu

F10: Save

and Exit

The BIOS automatically detects the values opposite the dimmed items (Capacity, Cylinder, Head, Sector and Transfer Mode). These values are not user-configurable. These items show N/A if no IDE device is installed in the system.

Primary IDE Master/Slave [Auto]

Secondary IDE Master/Slave [Auto]

Select [Auto] to automatically detect an IDE hard disk drive. If automatic detection is successful, the BIOS automatically fills in the correct values for the remaining fields on this sub-menu. If the hard disk was already formatted on a previous system, the setup BIOS may detect incorrect parameters. Select [Manual] to manually enter the IDE hard disk drive parameters. If no drive is installed select [None].

Configuration options: [None] [Auto] [Manual]

Access Mode [Auto]

The default [Auto] allows automatic detection of an IDE hard disk drive. Select [CHS] for this item if you set the IDE Primary Master/Slave to [Manual]. Configuration options: [CHS] [LBA] [Large] [Auto]

Before attempting to configure a hard disk drive, make sure you have the correct configuration information supplied by the drive manufacturer. Incorrect settings may cause the system to fail to recognize the installed hard disk.

2 - 16

Chapter 2: BIOS setup