2.5.5 APM Confi gurati on

Power Management/APM

[Enabled]

Restore on AC Power Loss

[Last State]

Advanced Resume Events Controls

 

Resume On Ring

[Disabled]

Resume On LAN

[Disabled]

Resume On PME#

[Disabled]

Resume On KB

[Disabled]

Wake-Up Key

[Any Key]

Resume On PS/2 Mouse

[Disabled]

Resume On RTC Alarm

[Disabled]

Power Management/APM [Enabl ed]

Allows you to enable to disable the Power Management/APM function. Configuration options: [Disabled] [Enabled]

Restore on AC Power Loss [Last State]

When set to Power Off, the system goes into off state after an AC power loss. When set to Power On, the system goes on after an AC power loss. When set to Last State, the system goes into either off or on state, whatever the system state was before the AC power loss.

Configuration options: [Power Off] [Power On] [Last State]

Resume On Ri ng [ Di sabl ed]

When set to [Enabled], the system enables the RI to generate a wake event while the computer is in Soft-off mode.

Configuration options: [Disabled] [Enabled]

Resume On LAN [ Di sabl ed]

When set to [Enabled], this parameter allows you to turn on the system through a PCI LAN or modem card. This feature requires an ATX power supply that provides at least 1A on the +5VSB lead.

Configuration options: [Disabled] [Enabled]

Resume On PME# [ Di sabl ed]

When set to [Enabled], the system enables the PME to generate a wake event while the computer is in Soft-off mode.

Configuration options: [Disabled] [Enabled]

2-30

Chapter 2: BIOS setup