9.Intel® B75 Serial ATA 3.0Gb/s connectors (7-pin SATA3G_1~5 [blue])

These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical drives via Serial ATA 3.0 Gb/s signal cables.

SATA3G_1

GNDRSATA RXP1_RSATA_RXN1GNDRSATA TXN1_RSATA TXP1_GND

P8B75-M

SATA3G_3

SATA3G_2

GND RSATA RXP3

RSATA RXN3

GND RSATA TXN3

RSATA TXP3

GND

GND RSATA RXP2

RSATA RXN2

GND RSATA TXN2

RSATA TXP2

GND

SATA3G_5

SATA3G_4

GND RSATA RXP5

RSATA RXN5

GND RSATA TXN5

RSATA TXP5

GND

GND RSATA RXP4

RSATA RXN4

GND RSATA TXN4

RSATA TXP4

GND

P8B75-M Intel® SATA 3.0Gb/s connectors

• You must install Windows® XP Service Pack 3 or later version before using Serial ATA hard disk drives.

•When using hot-plug and NCQ, set the SATA Mode Selection item in the BIOS to [AHCI]. See section 2.5.4 SATA Configuration for details.

10.Intel® B75 Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1 [gray])

These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0 Gb/s signal cables.

P8B75-M

SATA6G_1 GND RSATARXP1_ RSATA_RXN1 GND RSATATXN1_ RSATATXP1_ GND

P8B75-M Intel® SATA 6.0Gb/s connector

•You must install Windows® XP Service Pack 3 or later version before using Serial ATA hard disk drives.

•When using hot-plug and NCQ, set the SATA Mode Selection item in the BIOS to [AHCI]. See section 2.5.4 SATA Configuration for details.

Chapter 1: Product introduction

1-29