The navigation keys at the bottom of the screen allow you to move through the menus and select the menu options.

The RAID BIOS setup screens shown in this section are for reference only and may not exactly match the items on your screen.

The utility supports maximum four hard disk drives for RAID configuration.

Creating a RAID set

To create a RAID set:

1.From the utility main menu, select 1. Create RAID Volume and press <Enter>. The following screen appears:

Intel(R) Rapid Storage Technology - Option ROM - v10.0.0.1032

Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.

[ CREATE VOLUME MENU ]

Name:

Volume0

 

 

RAID Level:

RAID0(Stripe)

Disks:

Select

 

Disks

Strip Size:

128KB

 

 

Capacity:

0.0

GB

Sync:

N/A

 

 

 

Create

 

Volume

[ HELP ]

Enter a unique volume name that has no special characters and is

16 characters or less.

[↑↓]Change

[TAB]-Next

[ESC]-Previous Menu

[ENTER]-Select

2.Enter a name for the RAID set and press <Enter>.

3.When the RAID Level item is selected, press the up/down arrow key to select a RAID level to create, and then press <Enter>.

4.When the Disks item is selected, press <Enter> to select the hard disk drives you want to include in the RAID set. The SELECT DISKS screen appears:

 

 

[ SELECT DISKS ]

 

Port Drive Model

Serial #

Size

Status

0

ST3160812AS

9LS0HJA4

149.0GB

Non-RAID Disk

1

ST3160812AS

9LS0F4HL

149.0GB

Non-RAID Disk

2

ST3160812AS

3LS0JYL8

149.0GB

Non-RAID Disk

3

ST3160812AS

9LS0BJ5H

149.0GB

Non-RAID Disk

Select 2 to 6 disks to use in creating the volume.

[↑↓]-Prev/Next [SPACE]-SelectDisk [ENTER]-Done

ASUS P8B WS

4-13