Ai Overclock Tuner [Auto]

Allows you to select the CPU overclocking options to achieve the desired CPU internal frequency. Select any of these preset overclocking configuration options:

[Auto]Loads the optimal settings for the system.
[X.M.P.]

If you install memory modules supporting the eXtreme Memory Profile

 

(X.M.P.) Technology, choose this item to set the profiles supported by your

 

memory modules for optimizing the system performance.

 

The item X.M.P. appears only when you set the Ai Overclocking Tuner to [Manual].

Memory Frequency [Auto]

Allows you to set the memory operating frequency. The configuration options vary with the BCLK/PEG Frequency item settings.

Configuration options: [Auto] [DDR3-800MHz] [DDR3-1066MHz] [DDR3-1333MHz] [DDR3-1400MHz] [DDR3-1600MHz]

Selecting a very high memory frequency may cause the system to become unstable! If this happens, revert to the default setting.

iGPU Max. Frequency [Auto]

Use the <+> and <-> keys to adjust the value. The minimum frequency vary depending on the type of CPU installed.

Configuration options: [Auto] [depending on CPU] [3000MHz]

iGPU Max. Frequency is available only when you install a desktop processor that supports onboard graphics to the motherboard and there is no other VGA cards installed on the

motherboard.

EPU Power Saving Mode [Disabled]Allows you to enable or disable the EPU power saving function.Configuration options: [Disabled] [Enabled]

GPU Boost

GPU Boost accelerates the integrated GPU for extreme graphics performance. Configuration options: [Ok] [Cancel]

DRAM Timing Control

The sub-items in this menu allow you to set the DRAM timing control features. Use the <+> and <-> keys to adjust the value. To restore the default setting, type [auto] using the keyboard and press the <Enter> key.

Changing the values in this menu may cause the system to become unstable! If this happens, revert to the default settings.

Chapter 3

ASUS P8C WS

3-9