1.4.2Memory configurations
You may install 512MB, 1GB, 2GB, and 4GB unbuffered non‑ECC DDR3 DIMMs into the DIMM sockets.
• You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the
•For
-Install the memory modules from the blue slots;
-Install two identical DIMMs in DIMM_A2 and DIMM_B2; or
-Install four identical DIMMs in all four slots; or
-Install one identical DIMM pair in DIMM_A1 and DIMM_B1 (black) and another identical DIMM pair in DIMM_A2 and DIMM_B2 (blue).
•Always install DIMMs with the same CAS latency. For optimum compatibility, it is recommended that you obtain memory modules from the same vendor.
•Due to the memory address limitation on
-Use a maximum of 3GB system memory if you are using a
-Install a
•This motherboard does not support DIMMs made up of 256 megabits (Mb) chips or less.
P8H61-M2 Series Motherboard Qualified Vendors Lists (QVL)
DDR3-1066MHz capability
Vendors | Part No. | Size | SS/ | Chip Brand | Chip NO. | Timing | Voltage | DIMM socket support | ||
(Optional) |
| |||||||||
|
|
| DS |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 DIMM | 2 DIMM | 4 DIMM | |
Crucial | CT12864BA1067.8FF | 1GB | SS | Micron | 9GF22D9KPT | 7 | - |
| • | • |
Crucial | CT25664BA1067.16FF | 2GB | DS | Micron | 9HF22D9KPT | 7 | - | • | • |
|
ELPIDA | 1GB | SS | ELPIDA | - | 1.35V(low |
| • | • | ||
voltage) |
| |||||||||
ELPIDA | 2GB | DS | ELPIDA | 1.35V(low | • | • |
| |||
voltage) |
| |||||||||
KINGSTON | KVR1066D3N7/2G | 2GB | DS | ELPIDA | 1.5V | • | • |
| ||
KINGSTON | KVR1066D3N7/4G | 4GB | DS | Hynix | H5TQ2G83AFR | 7 | 1.5V | • | • |
|
Micron | 1GB | SS | Micron | 9GF22D9KPT | 7 | - |
| • | • | |
Micron | 2GB | DS | Micron | 9HF22D9KPT | 7 | - | • | • |
|
ASUS |