Serial-ATA Controller 1 [Enhanced]
This item appears only when you set the SATA Mode item to [IDE Mode].
[Disabled] | Disables the SATA function. |
[Enhanced] | Set to [Enhanced] to support more than four SATA devices. |
S.M.A.R.T. Status Check [Enabled]
S.M.A.R.T.
2.5.6USB Configuration
The items in this menu allow you to change the
The USB Devices item shows the
Legacy USB Support [Enabled]
[Enabled] | Enables the support for USB devices on legacy operating systems (OS). |
[Disabled] | The USB devices can be used only for the BIOS setup program. |
[Auto] | Allows the system to detect the presence of USB devices at startup. If |
| detected, the USB controller legacy mode is enabled. If no USB device is |
| detected, the legacy USB support is disabled. |
EHCI Hand-off [Disabled]
[Enabled] | Enables the support for operating systems without an EHCI hand‑off |
| feature. |
[Disabled] | Disables the function. |
2.5.7Onboard Devices Configuration
HD Audio Controller [Enabled]
[Enabled] | Enables the High Definition Audio Controller. |
[Disabled] | Disables the controller. |
The following two items appear only when you set the HD Audio Controller item to [Enabled].
Front Panel Type [HD]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or high- definition audio depending on the audio standard that the front panel audio module supports.
[HD] | Sets the front panel audio connector (AAFP) mode to high definition audio. |
[AC97] | Sets the front panel audio connector (AAFP) mode to legacy AC’97 |
Realtek LAN Controller [Enabled]
[Enabled] Enables the Realtek LAN controller. [Disabled] Disables the controller.
Chapter 2: BIOS information |