8.System panel connector (10-1 pin PANEL)This connector supports several chassis-mounted functions.
P8H61-M LX2 R2.0
PWR LED 
PWR BTN
GND
PWR
PLED-
PLED+
F_PANEL PIN 1
_ | Reset |
_ Ground |
LED+ | |
LED- | |
HD | |
HD | |
HD_LED 
RESET
P8H61-M LX2 R2.0 System panel connector
•System power LED (2-pin PLED)This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.
•Hard disk drive activity LED (2-pin +HDLED)This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable to this connector. The IDE LED lights up or flashes when data is read from or written to the HDD.
•Power/Soft-off button (2-pin PWRBTN)This 2-pin connector is for the system power button.
•Reset button (2-pin RESET)This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power.
9.Speaker connector (4-pin SPEAKER)The 4-pin connector is for the chassis-mounted system warning speaker. The speaker allows you to hear system beeps and warnings.
P8H61-M LX2 R2.0
SPEAKER
+5V GND GND Speaker Out
PIN 1 
P8H61-M LX2 R2.0 Speaker Out Connector
Chapter 1: Product introduction | 1-25 |
