4.CPU and chassis fan connectors (4-pin CPU_FAN, 3-pin CHA_FAN)

Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector.

CPU_FAN

GND

CPU FAN PWR

CPU FAN IN

CPU FAN PWM

CHA_FAN

P8H61-M LX

Rotation+12VGND

P8H61-M LX CPU connectors

Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors!

The CPU_FAN connector supports a CPU fan of maximum 2A (24 W) fan power.

Only the 4-pin CPU fan supports ASUS FanXpert feature.

5.USB connectors (10-1 pin USB56, USB78, USB910)

These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to

480 Mbps connection speed.

USB56

USB78

USB910

USB+5V USB_P6- USB_P6+ GND NC

USB+5V USB_P8- USB_P8+ GND NC

USB+5V USB_P10- USB_P10+ GND NC

P8H61-M LX

 

 

 

 

 

 

 

 

 

 

PIN 1

USB+5V

USB P5-

USB P5+ GND

PIN 1

 

 

 

P8H61-M LX USB2.0 connectors

USB+5V USB_P7- USB_P7+ GND

PIN 1

USB+5V USB P9- USB P9+ GND

 

Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!

The USB module cable is purchased separately.

Chapter 1: Product introduction

1-23