2.1.5Motherboard installation

The diagrams in this section are for reference only. The motherboard layout may vary with models, but the installation steps are the same for all models.

To install the P8Z77-I DELUXE/WD into a chassis:

1.Locate and remove the two screws near the Vcore card on the motherboard using a screw driver.

The screws secure the heatsink to the Vore card.

If the screw thread of the screws holes in the chassis is thin, then use the slim screws bundled wtih the motherboard.

2 Chapter

2-6

Chapter 2: Getting started