Asus P8Z77VLX SATA Mode Selection [AHCI], S.M.A.R.T. Status Check [Enabled], Hot Plug [Disabled], 3.5.4System Agent Configuration, Memory Remap Feature [Enabled]

SATA Mode Selection [AHCI]

Allows you to set the SATA configuration.

[IDE Mode]	Set to [IDE Mode] when you want to use the Serial ATA hard disk drives as
	Parallel ATA physical storage devices.
[AHCI Mode]	Set to [AHCI Mode] when you want the SATA hard disk drives to use the
	AHCI (Advanced Host Controller Interface). The AHCI allows the onboard
	storage driver to enable advanced Serial ATA features that increases
	storage performance on random workloads by allowing the drive to
	internally optimize the order of commands.
[RAID Mode]	Set to [RAID Mode] when you want to create a RAID configuration from the
	SATA hard disk drives.

S.M.A.R.T. Status Check [Enabled]

S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system. When read/write of your hard disk errors occur, this feature allows the hard disk to report warning messages during the POST. Configuration options: [Enabled] [Disabled]

Hot Plug [Disabled]

These items appear only when you set the SATA mode item to [AHCI Mode] or [RAID Mode], and allow you to enable/disable SATA Hot Plug Support. Configuration options: [Disabled] [Enabled]

3.5.4System Agent Configuration

EFI BIOS Utility - Advanced Mode

Main	Ai Tweaker	Advanced	Monitor	Boot	Tool
Back	Advanced\ System Agent Configuration >
System Agent Configuration				Enable or disable memory remap above
			Enabled	4G.
Memory Remap Feature

>Graphics Configuration

>NB PCIe Configuration

Memory Remap Feature [Enabled]

[Enabled]	Allow you to enable remapping the memory above 4GB.
[Disabled]	Disables this function.

Chapter 3

ASUS P8Z77-V LX 3-19