2 Chapter

2.2.6Onboard LEDs

1.Standby Power LED

The Standby Power LED will light up once the system is connected to a power source.

2.Q-LEDs

These ID LEDs of CPU, DRAM, VGA card, and HDD indicate key component status during POST (Power-on Self Test), providing an elegant embellishment to the motherboard design. The LED lights will flash sequentially during system bootup. If an error is found, the LED next to the error device will continue lighting until the problem is solved. This user-friendly design provides an intuitional way to locate the root problem within a second.

2-20

Chapter 2: Hardware information