3.8.4ASUS Drive Xpert
| UEFI BIOS Utility - Advanced Mode |
|
| Exit | |
Main | Ai Tweaker | Advanced | Monitor | Boot | Tool |
Back | Tool\ ASUS Drive Xpert > |
|
|
|
|
Drive Xpert Setup Utility |
|
| Drive Xpert Mode |
| |
|
| Normal Mode |
|
| |
Drive Xpert Mode |
|
|
| ||
Drive Xpert Device(s) List :
>SATA 6G E1 (Gray)
>SATA 6G E2 (Gray)
• Before using the Drive Xpert function, ensure that you have connected the SATA signal cables and installed SATA hard disk drives to the SATA6G_E1 and SATA6G_E2 connectors.
•You can only make one Drive Xpert change a time before you save BIOS settings and restart the computer.
Drive Xpert Mode
[Normal Mode] | Allows you to use the SATA6G_E1 and SATA6G_E2 connectors as normal |
| SATA connectors. |
[Super Speed] | Allows you to use the Super Speed function that combines two hard drives |
| as one single drive partition. |
[EZ Backup] | Allows you to use the EZ Backup function that copies and maintains an |
| identical image of data from the SATA6G_E1 drive to the SATA6G_E2 |
| drive. |
When using only one hard disk in Normal Mode, connect the hard disk to the SATA6G_E1 connector on the motherboard.
•All original data of the two hard drives will be erased for Super Speed setup.
• All original data of the SATA6G_E2 hard disk will be erased for EZ Backup setup.
Drive Xpert Device(s) List:
SATA 6G E1 (Gray) / SATA 6G E2 (Gray)
Press <Enter> to display the information of the hard disks which are connected to the SATA6G_E1 and SATA6G_E2 connectors on the motherboard.
Chapter 3
ASUS P9X79 PRO |