The following four items appear only when you set Chassis 1/2/3/4 Fan Profile to [Manual].

3 Chapter

Chassis 1/2/3/4 Upper Temperature [70]

Use the <+> and <-> keys to adjust the upper limit of the chassis temperature. The values range from 40ºC to 90ºC.

Chassis 1/2/3/4 Fan Max. Duty Cycle(%) [100]

Use the <+> and <-> keys to adjust the maximum chassis fan duty cycle. The values range from 60% to 100%. The minimum value can not lower than the setting of Min duty cycle. When the chassis temperature reaches 95 degree, fan will run up to full speed.

Chassis 1/2/3/4 Lower Temperature [40]

Displays the lower limit of the chassis temperature.

Chassis 1/2/3/4 Fan Min. Duty Cycle(%) [60]

Use the <+> and <-> keys to adjust the minimum chassis fan duty cycle. The values range from 60% to 100%. When the chassis temperature is under 40ºC, the chassis fan will operate at the minimum duty cycle.

Assistant/PCH Q-Fan Control [Enabled]

[Disabled]

Disables the Assistant / PCH Q-Fan control feature.

[Enabled]

Enables the Aassistant / PCH Q-Fan control feature.

Assistant/PCH Fan Speed Low Limit [600 RPM]

This item appears only when you enable the Assistant/PCH Q-Fan Control feature and allows you to disable or set the chassis fan warning speed.

Configuration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]

Assistant/PCH Fan Profile [Standard]

This item appears only when you enable the Assistant/PCH Q-Fan Control feature and allows you to set the appropriate performance level of the assistant/PCH fan.

[Standard]

Sets to [Standard] to make the assistant/PCH fan automatically adjust

 

depending on the assistant/PCH temperature.

[Silent]

Sets to [Silent] to minimize the fan speed for quiet assistant/PCH fan

 

operation.

[Turbo]

Sets to [Turbo] to achieve maximum assistant/PCH fan speed.

[Manual]

Sets to [Manual] to assign detailed fan speed control parameters.

The following four items appear only when you set Assistant/PCH Fan Profile to [Manual].

 

Assistant/PCH Upper Temperature [70]

 

Use the <+> and <-> keys to adjust the upper limit of the assistant/PCH temperature. The values

 

range from 40ºC to 90ºC.

 

Assistant/PCH Fan Max. Duty Cycle(%) [100]

 

Use the <+> and <-> keys to adjust the maximum assistant/PCH fan duty cycle. The values

 

range from 60% to 100%. The minimum value can not lower than the setting of Min duty cycle.

 

When the assistant/PCH temperature reaches 95 degree, fan will run up to full speed.

 

 

3-28

Chapter 3: BIOS setup