9.Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector.

2 Chapter

•We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard’s high-definition audio capability.

•If�� you��� ����want ��to connect������� �a high���������������-definition front����� panel����� audio����� module������ to�� this���� connector,���������� set���

the Front Panel Type item in the BIOS setup to [HD]; if you want to connect an AC'97 front panel audio module to this connector, set the item to [AC97]. By default, this connector is set to [HD].

10.Direct Connector (2-pin DRCT)

This connector is for the chassis-mounted button that supports the DirectKey function. Connect the button cable that supports DirectKey, from the chassis to this connector on the motherboard.

 

Ensure that your chassis comes with the button cable that supports the DirectKey feature.

 

Refer to the technical documentation that came with the chassis for details.

2-28

Chapter 2: Hardware information