3.HARDWARE SETUP

13)Panel Connector (20-pin SMB)

The following PANEL illustration is for items 14-19.

CUV4X-C

CUV4X-C System Panel Connectors

Power LED

 

Speaker

 

Connector

 

 

 

+5 V

PLED

+5V

Ground Ground

SPKR

+5 V

MLED ExtSMI# Ground

PWR SW Ground

ResetCon

Ground

Message LED

 

Reset SW

SMI Lead

ATX Power Switch*

*Requires an ATX power supply.

.3 H/WConnectors SETUP

14)System Power LED Connector(3-1 pin PWR.LED)

This 3-1 pin connector connects to the system power LED. The LED lights up when you turn on the system power, and blinks when the system is in sleep or soft-off mode.

15)System Warning Speaker Connector (4-pin SPEAKER) This 4-pin connector connects to the case-mounted speaker.

16)System Message LED Connector (2-pin MSG.LED)

This 2-pin connector is for the system message LED that indicates receipt of messages from a fax/modem. The normal status for this LED is ON, when there is no incoming data signal. The LED blinks when there is data received. The system message LED feature requires an ACPI OS and driver support.

17)System Management Interrupt Connector (2-pin SMI)

This 2-pin connector allows you to manually place the system into a suspend mode, or “Green” mode, where system activity is instantly decreased to save power and to expand the life of certain system components. Attach the case- mounted suspend switch this 2-pin connector.

18)ATX Power Switch / Soft-Off Switch Connector (2-pin PWR.SW)

The system power is controlled by a momentary switch attached to this connector. Pressing the button switches the system between ON and SLEEP, or ON and SOFT OFF, depending on the BIOS or OS settings. Pressing the button while in the ON mode for more than 4 seconds turns the system off.

19)Reset Switch Connector (2-pin RESET)

This 2-pin connector connects to the case-mounted reset switch for rebooting the system without turning off the power switch. This is a preferred method

38

ASUS CUV4X-C User’s Manual