Installing the UNIX Driver Software: UnixWare/OpenUnix 8

Overview

This procedure describes the installation procedure for the UnixWare driver. The driver is released as an installable package in datastream format.

Installing the Driver

1.Do the following to install the bcme package on the Unixware system: pkgadd -d <install-path>.

Where <install-path> is the full path name of the installable package bcme- <version>.pkg.

2.After the package is installed, use netcfg or scoadmin network to add the new network adapter.

3.When prompted, select the Line Speed and then select Advanced Option for Flow Control, MAC Address , and Jumbo MTU Size settings, if desired. The settings for these properties are listed below:

Line Speed

•Auto-Negotiate (default) (all speeds advertised)

38

ASUS PEB-G21 User Guide