Intel® Matrix Storage Manager option ROM utility

The Intel® Matrix Storage Manager Option ROM utility allows you to create RAID 0, RAID 1, RAID 10 (RAID 0+1), and RAID 5 set(s) from Serial ATA hard disk drives that are connected to the Serial ATA connectors supported by the Southbridge.

To enter the Intel® Matrix Storage Manager option ROM utility:

1.Install all the Serial ATA hard disk drives.

2.Turn on the system.

3.During POST, press <Ctrl+I> to display the utility main menu.

Intel(R) Matrix Storage Manager Option ROM v8.0.0.1027 ICH10R wRAID5

Copyright(C) 2003-08 Intel Corporation. All Rights Reserved.

 

 

 

 

 

 

[ MAIN MENU ]

 

 

 

 

 

 

 

 

3. Reset Disks to Non-RAID

 

 

1. Create RAID Volume

 

 

2. Delete RAID Volume

4. Exit

 

 

 

 

 

 

 

 

 

 

 

 

[ DISK/VOLUME INFORMATION ]

 

 

RAID Volumes:

 

 

 

 

 

 

 

 

None defined.

 

 

 

 

 

 

 

 

Physical Disks:

 

 

 

 

 

 

 

 

Port Drive Model

Serial #

 

Size

Type/Status(Vol ID)

0

XXXXXXXXXXX

XXXXXXXX

 

XX.XXGB

Non-RAID Disk

1

XXXXXXXXXXX

XXXXXXXX

 

XX.XXGB

Non-RAID Disk

2

XXXXXXXXXXX

XXXXXXXX

 

XX.XXGB

Non-RAID Disk

3

XXXXXXXXXXX

XXXXXXXX

 

XX.XXGB

Non-RAID Disk

 

 

 

 

 

 

 

[↑↓]-Select

 

[ESC]-Exit

 

[ENTER]-Select Menu

The navigation keys at the bottom of the screen allow you to move through the menus and select the menu options.

The RAID BIOS setup screens shown in this section are for reference only and may not exactly match the items on your screen.

ASUS P5QC

4-61