Asus PR-DLS 2.7.1 Switches, 2.7.2 Jumpers, 1.SCSI setting (2-pinSCSI_EN)

2.7Switches and jumpers

2.7.1 Switches

The following figure shows the location and default settings of the DIP switches on the motherboard.

Keep the default settings for stable system operation.

CLKSW

ON ON

OFF

1 2 3 4 5

(Default)

PR-DLS

PR-DLS DIP Switches

2.7.2 Jumpers

1.SCSI setting (2-pin SCSI_EN)

This jumper allows you to enable or disable the onboard SCSI feature. Keep the jumper open if you wish to install SCSI devices. Place a cap on the jumper to disable the onboard SCSI controller.

PR-DLS

SCSI_EN

Enable Disable (Default)

PR-DLS SCSI Setting

2-14 Chapter 2: Hardware information