2.5.2 Memory Configurations

The motherboard supports system memory of up to 12GB in a two-way interleaved or non-interleaved configuration. The two-way interleaved configuration requires that you install identical DDR DIMMs (exactly the same type and size) in pairs. For example, if you installed a 512MB module into DDR1, you must install the same type of 512MB module into DDR2. The same rule applies to pairs DDR3/DDR4 and DDR5/DDR6.

The non-interleaved configuration allows you to install one DIMM into DDR1 socket (the socket closest to the ATX power connector). Installing a single DIMM into any other socket does not work.

The following table lists the DIMM socket pairs and the memory modules that you can install.

Memory configuration table

DIMM Socket

184-pin registered DDR DIMM

Total Memory

DDR1

SDRAM 128MB, 256MB, 512MB, 1GB, 2GB

x1

DDR2

SDRAM 128MB, 256MB, 512MB, 1GB, 2GB

x1

DDR3

SDRAM 128MB, 256MB, 512MB, 1GB, 2GB

x1

DDR4

SDRAM 128MB, 256MB, 512MB, 1GB, 2GB

x1

DDR5

SDRAM 128MB, 256MB, 512MB, 1GB, 2GB

x1

DDR6

SDRAM 128MB, 256MB, 512MB, 1GB, 2GB

x1

Total System Memory (Max. 12GB)

=

 

The system chipset only supports PC2100/1600 registered DIMMs. Make sure to use only the specified DIMM types for stable system operation.

2-8

Chapter 2: Hardware information