The FastBuild Utility allows you to create RAID 0, RAID 1, RAID 10 ,and RAID 5, SPAN and JBOD set(s) from Serial ATA hard disk drives that are connected to the Serial ATA connectors supported by the Promise RAID.
To enter the FastBuild Utility:
1.Install all the Serial ATA hard disk drives at Red SATA Connector.
2.Turn on the system.
3.During POST, press <Ctrl> + <F> to enter the utility main menu.
FastBuild (tm) Utility (c)
[ Main Menu ]
View Drive Assignment ....... | [ 1 | ] | |
LD View / LD Define Menu ..... | [ 2 | ] | |
Delete LD Menu .............. | [ | 3 | ] |
Controller Configuration ..... | [ | 4 | ] |
[ Keys Available ]
Press 1..4 to Select Option | [ESC]Exit |
The RAID BIOS setup screens shown in this section are for reference only and may not exactly match the items on your screen.
Chapter 6: RAID configuration |