2.5Expansion slot

The chassis comes with a riser card bracket. You need to remove the bracket if you wish to install an PCI-X expansion card.

To install a PCI-X card:

1.Firmly hold a riser card bracket, then pull it up to detach it from the PCI-X slot on the motherboard.

Install a motherboard following the steps in section “2.3.3 Installing a motherboard.”

2.Use a Phillips (cross) screwdriver to remove the screw that secures the slot metal cover.

3.Install a PCI-X card to the bracket as shown, then secure the card

with a screw.

4.Take note of the holes on the riser card bay. The two pegs on the riser card bracket should match these holes to ensure that the bracket is properly in place.

Peg on the riser card bracket

ASUS R10-A2P4 1U rackmount chassis kit

2-11