RX3041 V2 Router User’s Manual
2.4.2 Dynamic IP address
The Host Name is optional, but may be required by some ISPs. The default MAC address is set to the WAN’s physical interface on the router. Use this address when registering for Internet service, and do not change it unless it is required by your ISP, You can use the “Clone MAC Address” button to copy the MAC address of the Ethernet Card installed by your ISP and replace the WAN MAC address with this MAC address.
Request IP address: Enter the IP address of the device which you will clone.
MTU: This is optional. You can specify the maximum size of the packets transmitted to the Internet. Leave it as it is if you do not wish to set a maximum packet size.
MAC Cloning: Enable or disable MAC cloning option.
MAC Address: Enter the MAC address of the device you want to clone.
22