Emergency light mode
The LED projector flashes a blinking white light when you use this feature.
Splendid/Exit
button
To use your LED projector as a flashlight:
1.Disconnect all peripherals from your LED projector then press the power button to turn it on.
2.Open the cover of your LED projector's lens.
3.Press 
on the control panel of your LED projector to launch the NO SIGNAL display.
4.Press 
repeatedly until the LED projector flashes a blinking white light.
IMPORTANT! Ensure that your LED projector is charged and can run on battery mode before enabling this feature. Battery time varies depending on usage.
NOTE: To turn off or switch between the flashlight and emergency light feature of your LED projector, just press the Splendid/Exit button until your preferred lighting feature is disabled or enabled.
LED projector | 13 |