3. Panel connector (8-1 pi n PANEL)

This connector supports several chassis-mounted functions through connection with the motherboard panel connector (36-1 pin). Refer to the section “10. System Panel Connector (36-1 pin PANEL)” on page 4-11 for details.

•System power LED (2-pin PLED)

This 2-pin connector is for the system power LED. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.

•Hard disk drive activity (2-pin HDLED)

This 2-pin connector is for the HDD Activity LED. The IDE LED lights up or flashes when data is read from or written to the HDD.

•Power/Soft-off button (1-pin PWR)

This connector is for the system power button. Pressing the power button turns the system ON or puts the system in SLEEP or SOFT-OFF mode depending on the BIOS settings. Pressing the power switch for more than four seconds while the system is ON turns the system OFF.

 

PWR

 

 

PWR+ GND NC

 

PANEL

 

 

PLED+ PLED-

HDLED+ HDLED-

Front panel daughterboard

PLED

HDLED

 

 

 

* Requires an ATX power supply.

ASUS T2-PH2

4-13