This menu allows you to set up the administrator and user password of your Notebook PC. It also allows you to control the access to your Notebook PC’s hard disk drive, input/output (I/O) interface, and USB interface.
NOTE:
•If you install a User Password, you will be prompted to input this before entering your Notebook PC's operating system.
•If you install an Administrator Password, you will be prompted to input this before entering BIOS.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main Advance Boot Security Save & Exit
Password Description
If ONLY the Administrator’s password is set,then this only limits access to Setup and is only asked for when entering Setup. If ONLY the user’s password is set, then this is a power on password and must be entered to boot or enter Setup. In Setup, the User will have Administrator rights.
Administrator | Password Status | NOT INSTALLED |
User Password | Status | NOT INSTALLED |
Administrator Password |
| |
User Password |
|
|
HDD User Pwd Status : | NOT INSTALLED | |
Set Master Password |
| |
Set User Password |
| |
I/O Interface Security |
| |
System Mode state | Setup | |
Secure Boot state | Disabled | |
Set Administrator Password. The password length must be in the following range:
Minimum length 3 Maximum length 20
→← : Select Screen
↑↓ : Select Item
Enter: Select
F1 : General Help
F9 : Optimized Defaults
F10 : Save & Exit
ESC : Exit
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
To set the password:
1.On the Security screen, select Administrator Password or User Password.
2.Type in a password then press 
.
3.
.
76 | Notebook PC |