2.1Chassis cover

2.1.1Removing the side cover

• Ensure that you unplug the power cord before removing the side cover.

Take extra care when removing the side cover. Keep your fingers from components inside the chassis that can cause injury, such as the CPU fan, rear fan, and other sharp-edged parts.

The images of the barebone server shown in this section are for reference purposes only and may not exactly match the model you purchase.

To remove the side cover:

1.Remove the two screws that secure the side cover.

2.Slide the side cover for about half an inch toward the rear until it is disengaged from the chassis.

3.Carefully lift the side cover and set it aside.

1

1

2

2-2

Chapter 2: Hardware setup