Security Setting

Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Main���� Advanced�������� Boot���� Security Save & Exit

Password Description

If ONLY the Administrator’s password is set, this only access to Setup and is only asked for when entering Setup. If ONLY the user’s password is set, this is a power on password and must be entered to boot or enter Setup.

In Setup the User will have Administrator rights.

Set Administrator Password The password length must be in the following range: Minimum length 3 Maximum length 20

Administrator Password Status

NOT INSTALLED

 

 

User Password Status

NOT INSTALLED

 

: Select Screen

Administrator Password

 

:

Select Item

User Password

 

Enter: Select

 

 

+/—: Change Opt.

HDD User Password Status :

NOT INSTALLED

F1:

General Help

 

 

F9:

Optimized Defaults

I/O Interface Security

 

F10:

Save & Exit

 

 

ESC:

Exit

Version 2.01.1204. Copyright (C) 2010 American Megatrends, Inc.

To set the password:

1.On the Security screen, select Setup Administrator Password or User Password.

2.Type in a password and press [Enter].

3.Re-type to confirm the password and press [Enter].

4.Password is then set.

To clear the password:

1.On the Security screen, select Setup Administrator Password or User Password.

2.Enter the current password and press [Enter].

3.Leave the Create New Password field blank and press [Enter].

4.Leave the Confirm New Password field blank and press [Enter].

5.Password is then cleared.

Notebook PC User Manual

A-5