1.3.4How to use your wireless 3D glasses

Charge your wireless glasses before using:

Connect one end of the USB cable to your PC or notebook that equipped with USB port, and the other end to the micro USB port of the glasses.

USB Connection

Used to recharge the glasses.

Press the On/Off button:

Press the On/Off button to turn on or off the power for this 3D glasses. You may check the built-in battery status by examing the light:

Green: The battery is fully charged.

Red: The battery is running out, and needs recharge.

No Light: The battery is exhausted, and needs recharge immediately.

Green

Red

On/Off Button

Press button for battery status

1-6

Chapter 1: Product Introduction

Page 12
Image 12
Asus VG278H manual How to use your wireless 3D glasses, Charge your wireless glasses before using, Press the On/Off button