2.3Detaching the arm/base (for VESA wall mount)

The detachable arm/base of the VK191 Series LCD monitor is specially designed for VESA wall mount.

To detach the arm/base:

1.Have the front of the monitor face down on a table.

2.Remove the rubbers in the four screw holes (Figure 1).

3.Follow the direction to remove the back lid (Figure 1). Use a screwdriver to remove the four screws on the arm, then slide out the arm/base to detach it from the monitor (Figure 2).

Rubbers in the screw holes

Back lid

Arm/base

Figure 1

Figure 2

We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.

2-2

Chapter 2: Setup