Asus VS24AHP manual Detaching the arm/base for Vesa wall mount

2.3Detaching the arm/base (for VESA wall mount)

The detachable arm/base of this monitor is specially designed for VESA wall mount.

To detach the arm/base:

1.Have the front of the monitor face down on a table.

2.Remove the rubbers in the four screw holes. (Figure 1)

3.Remove the base (Figure 2).

4.Pry the rear hinge cover (Figure 3).

5.Use a screwdriver to remove the four screws on the hinge (Figure 4), then remove the hinge.

	1
	2
Figure 1	Figure 2
Figure 3	Figure 4

We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.

2-2 Chapter 2: Setup