III. INSTALLATION

DRAM Memory Installation Procedures:

1. The SIMM memory modules will only fit in one orientation as shown because of a "Plastic Safety Tab" on one end of the SIMM slots which requires the "Notched End" of the SIMM memory modules.

1 2 3 4

72 Pin SIMM Sockets

Bank 0 Bank 1

 

DRAM Memory Module Example

Notched End

Memory)

2.Press the memory module firmly into place starting from a 45 degree angle making sure that all the contacts are aligned with the socket.

3.With your finger tips, rock the memory module into a vertical position so that it clicks into place.

Support Clip

72 Pin DRAM in SIMM Socket

III. INSTALLATION (System

Safety Tab (This Side Only)

Mounting Hole

4.The plastic guides should go through the two "Mounting Holes" on the sides and the "Metal Clips" should snap on the other side.

5.To release the memory module, squeeze both "Metal Clips" outwards and rock the module out of the "Metal Clips".

ASUS VX97 User’s Manual

17