The window design changes from Wireless LAN to Ad Hoc when you highlight a wireless device from the list.

4.When connected to the wireless device, the wizard displays the connection information.

Click Next to configure the TCP/IP settings.

If the WiFi-TV fails to connect to a wireless device, the wizard instructs you to change the WiFi-TV settings or click the Back button to rescan.

5.Assign the IP address manually by entering the values in the IP address field.

In an Ad-hoc network, you must specify the WiFi-TV IP address manually. Make sure that the WiFi-TV IP address is on the same subnet as that of the other wireless device to establish connection. For example, if the other wireless device IP is 192.168.0.1, then the WiFi-TV IP must be 192.168.0.X, where X = 2 ~ 254).

6.Click Finish.

3 - 10

Chapter 3: Wi-Fi features