2.Use a Phillips screwdriver to tighten the four heatsink screws in a diagonal sequence.

3.Connect the fan cable to the 4pin connector labeled CPU0_FAN.

Z7S WS

CPU0_FAN

CPU0_FAN

PWM Control

 

CPU1_FAN

 

 

FAN Speed

 

 

FAN Power

 

 

GND

CPU1_FAN

Z7S WS CPU fan connectors

PWM Control

FAN Speed

FAN Power

GND

DO NOT forget to connect the CPU fan cable! Hardware monitoring errors may occur if you fail to plug this connector.

4.Repeat steps 1 to 3 to install the other heatsink if you have installed a second CPU, then connect the fan cable to the 4pin connector labeled CPU1_FAN.

ASUS Z7S WS

2-13